Voice Enabling Project For Blind People Using GPS-project

Voice Enabling Project For Blind People Using GPS

Embedded system is the combination of software and hardware. In this project, the software is encapsulated in the hardware. In embedded system entire hardware is monitored and controlled by the software which is developed by a programmer/user. This technology reduces the cost and size of the devices.

It also reduces the manual operation. Finally it gives the automation products such as Home Appliances, Security systems, Satellite, Industrial Automation and etc, Now a days to improve the efficiency of the embedded products, people uses some new technologies, like RTOS (Real Time Operating System which gives deterministic and multitasking facilities), PROTOCOLs (such as I2C, SPI, CAN, LIN and TCP/IP which increase the speed of the process).

In this project “Voice Enabling Project For Blind People Using GPS”, we are going to provide assistance for the blind people. GPS satellites encircling the earth twice a day in a very precise orbit and transmit signal information (Longitude, Latitude, Altitude and Time) to earth. GPS receivers take this information and use triangulation to calculate the user’s exact location. Using this process those three values of the specified areas are calculated and used in the embedded coding. Each and every second satellite gives location values to the uc. the value matches with the prefixed value, then it enable the voice IC.

Voice Enabling Project For Blind People Using GPS

Voice Enabling Project For Blind People Using GPS

Voice Enabling Project For Blind People Using GPS

Voice Enabling Project For Blind People Using GPS

Component List For “Voice Enabling Project For Blind People“

HARDWARE REQUIREMENT:
Microcontroller unit – AT89s52
GPS
Voice Enabling Unit – APR9600
Power supply unit.
Ultrasonic sensor
Obstacle sensor
SOFTWARE REQUIREMENT:
Cross-c compiler ( KEIL U-VISION)
Hex Up loader (UC-FLASH)